Our pans are engineered to create incredible food, in both domestic and commercial environments. They offer exceptional control, conductivity and heat retention. Whether searing a ribeye, crisping the skin of a sea bass or caramelising onions, expect perfection.
Each Solidteknics pan is made from a single sheet of wrought monobloc iron. No joins, no rivets, no points of weakness. Although lighter than cast iron, our products are so durable they come with a multi-generational warranty. Designed to live in kitchens, not in landfill.
Pans don’t have to be covered in toxic synthetic coatings to deliver results in the kitchen. Ours are made from 100% natural materials. We pre-season them with rice bran oil, creating a strong, inert, all-natural non-stick cooking surface that improves with age.
Everything you need to know about the Soliditi Knife.
Like all the best Japanese-style knives, the Söliditi has a chisel edge, meaning that the blade is only sharpened on one side. This asymmetric alignment tends to cause the knife to steer inwards when cutting. It is a design that allows for extremely precise chopping and fine slicing, but if you’re used to a symmetrical Western blade, learning how to counter the knife’s inward steer can take time. You need to consciously correct the motion by steering slightly outwards. With a bit of practice, this will soon become automatic.
There is a risk of your knife rusting if left in contact with water for an extended period, so never leave it to soak or put it in a dishwasher. Thoroughly dry after washing, then rub it all over with food-safe oil before storing in a dry place.
The easiest way is with our InversionEdge Sharpening System. Otherwise, you’ll need to use traditional Japanese manual sharpening methods: high-quality water stones and a lot of skill. Search YouTube for ‘sharpening Japanese chisel-edge knives’ or ‘sharpening Japanese single-bevel blades’ for a long list of videos. Never use a steel, a drag-through gadget, powered wheels or belts (or any method other than fine water stones!) or that chisel-edge geometry could be irreversibly ruined.
The cutting edge will be damaged by impact with hard surfaces, so avoid = cutting through bones, frozen foods, coconuts or extremely hard, dense fruit and vegetables.
After being cast and forged, our knives are sharpened by hand. As a result of this artisanal process, each knife will be left with unique marks. As with our pans, our knives are workhorses, not beauty queens. They’re designed to last for generations. The beauty is in the performance!
A carbon steel knife will never remain visually pristine. It will develop a greyish-blue patina over time. This is not a bad thing – the patina acts as a seal, reducing the risk of rust or corrosion.
Unlike the greyish-blue patina, rust presents as orangey. It needs to be removed. First, clean the blade with a non-abrasive cleaning solution and a cloth. When clean, mix a small amount of baking powder with a little water to form a light paste. Lay your knife on a surface and apply the baking paste to one side of the blade. Depending on the quantity of rust, wait between five and 30 minutes.
With a scrubbing pad or steel wool, scrub the paste-covered side of the blade. Reapply more paste if needed until all the rust has gone. Flip the knife over and repeat on the other side of the blade.
Finally, wipe the blade with a cloth to remove any rust particles and soda paste. Apply a light coating of oil for extra protection, then wipe off any excess oil. After all that activity, your blade may need a quick sharpen.